<< Back to 2011 Woods Agriculture & Turf
2011 Woods LU126 Curved Boom
LU Series loader mounts utilize the structural integrity inherent in 45 to 90 horsepower tractors and feature a center-point attachment—reducing obstructions and providing a much cleaner, more integrated look. A wrenchless, 2-pin mid-attach mount design allows for quick attaching and detaching of the loader boom from the tractor. Simply set the bucket on the ground, roll to release pressure on attachment pins, and set loader stand. Pull the attachment pins by hand, detach hydraulics, then drive out.
Features
All
Commercial grade bucket – increases bucket efficiency with round-back bucket design, engineered to allow easy and even material flow, into and out of bucket. Optional bolt-on cutting edge available.
Mid-attaching loader boom – provides less obstruction along the side and front of tractor, reducing tire interference for greater turning flexibility and shorter turn radius.
4-bar bucket linkage – allows for 35-degree bucket roll-back angle to carry full loads without loss, and a 50-degree bucket dump angle to ensure complete emptying.
High performance, multi-function loader control valve – creates faster regenerative valve action. While bucket returns from dump position to loading position, oil flow from lift cylinders directs to bucket cylinders, leveling the bucket.
2011 Woods LU126 Curved Boom
Specifications
Engine
- Cylinders
- (Bucket diameter) 2.76"
Transmission
- Horsepower
- (Recommended tractor) 45-90
Dimensions
- Width
- (Bucket) 72", 84"
- Capacity
- (Bucket rated c.c. ft. (72'/84") 17.1 / 20.0
- Diameter
- (Pivot pins) 1.25"
- Lift Capacity
- (at bucket pin) 3,000 lbs
(at 31.5" ahead bucket pins) 1,970 lbs - Weight
- (Breakout at bucket pin) 4,650 lbs
(Breakout at 31.5" ahead bucket pins) 3,250 lbs - Lift Height
- (Maximum) 126"
- Clearance
- (under bucket) 101"
- Reach at Maximum Height
- 29"
- Angle
- (Bucket roll back) 35°
(Bucket dump) 50° - Depth
- (Maximum digging) 5"
- Lift Cylinders
- (Diameter) 2.48"
General Information
- PSI
- (Tested hydraulic) 2,750 psi
Photos