2024 Bush Hog Bush Hog® 2810 Flex-Wing Rotary Cutter
Call for Price
Overview
Availability
Brochure
Year2024
MakeBush Hog
ModelBush Hog® 2810 Flex-Wing Rotary Cutter
Product Features
Description
Bush Hog® 2810 Flex-Wing Rotary Cutter.
The perfect Flex-Wing for mowing narrow highway right-of-ways.
The right-hand wing model 2810 is easier to service and has features that maximize performance and durability in all uses. Made especially for highway right-of-way mowing or other areas where the Flex-Wing with a single wing is the best fit, the 2810 is unsurpassed in performance, durability, and reliability.
Key Features
- Industry first, massive three" output shaft with up to 27% more splines than smaller shafts for maximum transmission of torque to blade pan.
- The Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked as often as you walk around the machine. Never climb onto the cutter again to check the gearbox oil levels.
- Bush Hog's E-Z lube drivelines are quick and easy to service. All grease fittings on the pto CV driveline and wing drivelines align for quick location of grease points. Since all grease fittings on all drivelines are in an up position on every 5th revolution, service times are reduced.
Performance Features
- Wing and center skids are 3/8-inch thick for extended wear and outside edges are turned up at 45° to stop heavy ground contact that might damage the sidebands.
- Center section blades properly align with center wheels to closely cut out the bottom of ditches.
- Grease fittings and spring steel bushings at axle pivot points for longer life.
- Free wing float without movement of the hydraulic cylinder rod is 22° down and 45° up
Construction Features
- Industry first, massive 3-inch output shaft with up to 27% more splines than smaller shafts for maximum transmission of torqueto blade pan.
- The Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked as often as you walk around the machine. Never climb onto the cutter again to check the gearbox oil levels.
- Bush Hog’s E-Z lube drivelines are quick and easy to service. All grease fittings on the pto CV driveline and wing drivelines align for quick location of grease points. Since all grease fittings on all drivelines are in an up position on every 5th revolution, service times are reduced.
Safety Features
- Highway safety lighting is standard.
Specifications
- Cutting Width: 10' 6"
- Cutting Height: 2" – 14"
- Cutting Capacity: 4"
- Transport Width: 8' 2"
- Transport Height: 7' 3"
- Transport Length: 15' 3"
- Approximate Weight: 5,000 lb.
- Approximate Tongue Weight: 1,800 lb.
- Minimum Tractor PTO HP: 60 HP
- Hitch: Perma-Level
- Center Deck: 11GA Over 7GA
- Wing Decks: 7GA
- Wing Cutting Angles: 22 deg. Down And 45 deg. Up
- Wing Level Adjustment: Turnbuckles
- Sidebands: 1/4" X 13 1/2"
- Transfer Gearbox: 250 HP
- Cutting Gearboxes: 225 HP
- Input Driveline: Category 6
- Cutting Drivelines: Category 4
- Blade Holder: 7GA Round
- Blades: 1/2" X 4"
- Blade Tip Speed (fpm): 16,268
- Axle Suspension: Springs @ Each Axle
- Center & Wing Hydraulics: 3 Hoses Standard
- Safety Tow Chain: Standard
- Distribution Baffles: Optional
- PTO Driveline Support: Optional
- Warranty: 10-year Gearbox Limited Warranty: 1-year Machine Limited Warranty
NOTES:
Unit(s) shown equipped with certain selections and options; please consult with your local Bush Hog dealer for all available configurations.
*Measured from Wing Skid to Wing Skid when Folded
**Measured at Maximum Transport Height
***Measured from hitch tip to rear of 21" Laminated TireGeneral
Working Width | 10 ft. 6 in. |
Width | Transport: 8 ft. 2 in. |
Length | Transport: 15 ft. 3 in. |
Weight | 5000 lb. |
Recommended HP | (PTO): 60 HP |