2024 Bush Hog Bush Hog® DSP8
Call for Price
Key Features
Product Features
Description
Bush Hog’s new DSP Line of Pull-Type Drag Scrapers, with standard fixed axle or optional tilt axle, is ideal for moving large quantities of material, leveling, and finish grading. The DSP units come available in 8’, 10’ and 12’ widths. DSP scrapers equipped with the optional tilt axle can do everything the standard axle does, as well as remove material on an angle for sloping, terracing and ditching. Material can be transferred by dragging it to nearby locations and raising the scraper to deposit the load. Surfaces can be graded and leveled by scraping material from high areas and allowing accumulated material to flow under the grader blade into lower areas. The DSP scrapers are designed for 70 to 125 horsepower tractors and have replaceable wear plates on the sides.
- Horsepower Rating: 70 to 125 HP
- Transport Width: 97"
- Working Width: 96 3/16"
- Capacity: 1 3/4 cu. yds.
- Weight Without Material in Weight Box (Tilt Axle): 1525 lb.
- Weight Without Material in Weight Box (No Tilt Axle): 1405 lb.
- Weight of Material in Weight Box: 760 lb.
- Depth of Box: 39"
- Maximum Cutting Depth: 5" Below Grade
- Dump Clearance: 21"
- Maximum Tilt Depth to the Right: 7"
- Maximum Tilt Angle: 3 1/2 deg.
- Tongue Construction: 4 x 4" X 1/4" Tubing
- Side Plate Construction: 3/8 x 24 5/16" High X 39 3/4" Deep
- Moldboard Construction: 1/4" X 24 1/4" High When Formed
- Cutting Edge: 1/2" X 6" Reversible & Replaceable
- Cutting Edge Reinforcement: 3" X 3" X 5/16" Angle Plus A 1/4" Mold Board = 9/16" at the Cutting Edge
- Tires: NEW 9.5L X 15 8 ply Rib TL on Rim 5 With 5.5 BHC
- Maximum Transport Speed: 20 MPH
- Lift Cylinder: 3 1/2" X 8" ASAE
- Tilt Cylinder: 3 1/2" X 8" ASAE
- Available in 8-foot, 10-foot, and 12-foot widths
- Optional tilt axle removes material on an angle for sloping, terracing and ditching.
- DSP scrapers are designed for 70 to 125 horsepower tractors
- Replaceable wear plates on the sides.
General
| Capacity | 1 3/4 cu. yd. |
| Recommended HP | 70 to 125 HP |
| Weight | (Tilt Axle): 1525 lb.; (No Tilt Axle): 1405 lb. |
Dimensions
| Working Width | 96 3/16 in. |
| Width | Transport: 97 in. |
