2024 Kubota TR60
Call for Price
Key Features
Availability
Brochure
Year2024
MakeKubota
ModelTR60
Product Features
Description
Kubota by Land Pride: The TR Series Trencher is available in two sizes with two motor options. This contractor-grade Trencher will make quick work of trenching runs for pipe, cable, electrical, or irrigation. It comes in two common sizes, 4' and 5' trenching depths, and features 4 different chain styles for each model. Chains are either 2 or 4 pitch for clay, sandy, or lightly compacted soils or alligator or scorpion chains for highly compacted or rocky soils. Only available through Kubota Dealers.
Features
- Quality hydraulic motor available in two volume flows: Provides long life, durable construction. Two flow options allow the trencher to fit many skid steers.
- Reversible motor: Helps in areas where rocks may lodge and stop chain, can back out and try again.
- Boom ball bearings are self- contained ball bearing with triple- lip seals and metal shroud covers: Boom ball bearings are protected against dirt invasion and do not require greasing.
- Drive bearings are self-contained, single & double row ball bearings with extra heavy duty seals.: Drive bearings are protected against dirt invasion and do not require greasing.
- Motor case drain: Reduces back pressure at motor thus delivering more power for trenching.
- Hardened cup teeth: Increase life and productivity of the teeth.
- High tensile strength trencher chai: Chain stands up to rugged use.
- Trencher chain side links: Designed for anti-flex without binding or piggybacking.
- Full length bolts securing teeth with spacers at every station.: Helps to distribute load equally on both sides of the chain. Minimizes chain wear.
- Side shifts from center to 22" to the right: Allows the operator to get up close to buildings and fences.
- Grease cylinder chain tightener: Makes tightening the chain easy.
- Connect under pressure hydraulic couplers: Couplers are easier to connect and disconnect.
- Removable spoil auger: Helps dig a trench closer to fences and buildings
- Floating crumber shoe: Improves the performance of the crumber shoe.
- Depth indicator (Patent-pending): Helps the operator judge the depth of trench from the operator's seat.
- Numerous chain options: Plenty of options to choose from to match your local digging conditions.
- Heavy frame construction: Stands up to rugged use. (5/16" Thick hitch plate with 3/4" reinforced bar around three sides of the bottom lock pin slots.)
- TR60: 5' digging depth: Customer can choose which trencher best suits his/her needs.
- 221-373 fpm chain speed (Skid steer hydraulic flow and pressure ratings vary.: Good operating speed to get the work done.
Specifications
- Operating weight With 2 pitch cup chain and hydraulic side shift.: 1300 lb. (589.7 kg)
- Overall length: 102.5 in. (2.60 m)
- Standard boom length: 77.5 in. (1.97 m)
- Digging depth at 60 degrees: 5 ft. (1.52 m)
- Frame width w/step: 61.13 in. (1.55 m)
- Overall width: 64 in. (1.63 m)
- Overall height: 34.1 in. (86.6 cm)
- Auger diameter: 15.5 in. (39.4 cm)
- Auger clearance: 28.5 in. - 30.5 in. (72.4 cm - 77.5 cm)
- Side shift options Manual: Side shifts from center to 22 in. (55.9 cm) right of center
- Side shift options Hydraulic: Side shifts from center to 22 in. (55.9 cm) right of center
- Side shift travel: 22 in. (55.9 cm)
- Trenching widths available: 6 in., 8 in. & 10 in. (15.2 cm, 20.3 cm, 25.4 cm)
- Motor options: Low flow (LF) & high flow (HF) motors
- Hydraulic motor flow requirements Low flow: 12-24 gpm (45.4-90.8 lpm)
- Hydraulic motor flow requirements High flow: 24-40 gpm (90.8-151.4 pm)
- Hydraulic motor pressure range Low flow: 2400-4500 psi (16.55-31.03 MPa)
- Hydraulic motor pressure range High flow: 2000-3600 psi (13.79-24.82 MPa)
- Chain speed Low flow: 227-366 fpm (69-112 m/min)
- Chain speed High flow: 221-373 fpm (67-114 m/min)
- Motor case drain: Standard
- Motor: Reversible
- Chain tightener: Grease Cylinder
- Crumber shoe: Floating
- Depth indicator (Patent-pending): Standard (Viewable from operator seat)
- Roller guide bearings at boom head: Self-contained, ball bearings with triple-lip seals & metal shroud covers
- Drive bearings between motor & drive sprocket: Self-contained, single & double row ball bearings with extra heavy duty seals
- Spoil auger: Removable
- Hydraulic coupler options: Standard and large flat face, connect under pressure, couplers
- Chain options - numerous: Cup teeth on 2 or 4 pitch, scorpion w/cup teeth, or alligator w/cup teeth
- Step and step pads: Heavy-duty, cast steel
- Frame construction: Heavy duty 5/16 in. (8 mm) thick w/ 3/4 in. (19 mm) reinforced bar around three sides the bottom lock pin slots.
- Trencher chain: 2.00 in. (5.1 cm) Pitch. 50,000 lb. (22679.6 kg) tensile strength
- Trencher chain side links: Anti-flex
- Cup teeth: Hardened with hard facing
General
| Auger Diameter | 15.5 in. (39.4 cm) |
| Auger Discharge Reach | At 60 deg.: 5 ft. (1.52 m) |
